Modern Robotics :: essays research papers

The design argufy is to navigate a robot through a predetermined course using the know guidege from previous labs and additional research of any kind. Solutions are free from restraint except for the requirement that the voltage source may non exceed 9 volts (standard layout would dictate a 7.2 voltage source). The course layout, dubbed a maze, is a simple square enclosure with 2 barriers protruding from the dear(p) and far rails. Black and white tape is laid out inside suggested a course for robots to take or for optic sensors to follow. The interior walls create the challenge while the rest of the course remains very limitless in navigation. Time and accuracy must be taken in consideration, as alumna is based on both course time and the robots ability to maintain arranged time.The open ended ness of the assignment led to many proposed choices concerning the path of robot, type of control and implantation of chosen design. The most obvious choice was optic sensors, as the ta pe would ensure a consistent route through the maze and the most accurate times. The design would be as obvious as the route two sensors controlling the speed or direction of the wheels. When one sensor drifted from the light the wheels would compensate to bring the robot back on track. The idea seemed simple and a sure way to promptly complete the assignment without trouble. Further thought engendered many concerns not only must the robot navigate the course but it must also do it faster than the competing teams. Sensors would ensure the robot would cross the finish line, but not with a fast time. The course the sensors must take is loopy and has somewhat lancinating bend dexters for the non agile robot. Speed would have to be decreased in order to keep the robot on the track, as a fast and sharp turn could throw the robot off the tape, destroying any possibility of a finish. Another problem arose with sensitivity. The robot, once of the tape a little, would not be able to smoo thly get back on the course, resulting in swerving and thus making the course twice as long. With these considerations in mind, we decided that the sensor idea would not be the best choice for our final design.Our second proposed option gained a notch in the level of thinking, although it was still simple and to the point.