Modern Robotics :: essays research papers

The design challenge is to navigate a robot done a preset course using the knowledge from previous labs and additional research of any kind. Solutions are free from restraint except for the requirement that the electromotive force source may not exceed 9 volts (standard layout would dictate a 7.2 voltage source). The course layout, dubbed a maze, is a simple square enclo reliable with 2 barriers protruding from the near and far rails. Black and white tape is laid out inside suggested a course for robots to take or for optic demodulators to follow. The intragroup walls create the challenge while the rest of the course remains very limitless in navigation. Time and accuracy must(prenominal) be taken in consideration, as grade is based on both course time and the robots ability to maintain consistent time.The open ended mantle of the assignment led to many proposed choices concerning the path of robot, type of control and implantation of chosen design. The most obvious choice was optic sensors, as the tape would check out a consistent route through the maze and the most accurate times. The design would be as obvious as the route two sensors haughty the speed or direction of the wheels. When one sensor drifted from the light the wheels would compensate to bring the robot back on track. The idea seemed simple and a sure way to rapidly complete the assignment without trouble. Further thought engendered many concerns not only must the robot navigate the course but it must also do it closeer than the competing teams. Sensors would ensure the robot would cross the finish line, but not with a fast time. The course the sensors must take is around the bend and has somewhat sharp turns for the non agile robot. Speed would have to be decreased in order to keep the robot on the track, as a fast and sharp turn could throw the robot off the tape, destroying any possibility of a finish. Another problem arose with sensitivity. The robot, once of the tape a little, would not be able to smoothly get back on the course, resulting in swerving and thus making the course twice as long. With these considerations in mind, we decided that the sensor idea would not be the best choice for our final design.Our second proposed option gained a notch in the level of thinking, although it was still simple and to the point.